Tunnisteet
VAG Toyota/Lexus Subaru software update Renault Porsche Nissan Mitsubishi Mercedes BMW Abrites
IN THIS UPDATE YOU CAN EXPECT THE FOLLOWING:
ABRITES DIAGNOSTICS FOR BMW VEHICLES ONLINE VERSION 34.9

In the new version of the ABRITES Diagnostics for BMW vehicles online 34.9, we have implemented support for the latest versions. Coding and flashing files are updated to the latest versions.
By updating to the newest version, you will also be able to purchase new licenses for bikes, immobiliser parts synchronisation and key programming. See more below.
NEW SOLUTION FOR BMW BIKES: KEY PROGRAMMING, CHASSIS AND ECU ADAPTATION (ID CHANGE)

Introducing the new ABRITES software license for BMW motorcycles key programming, chassis and ECU adaptation BN017!
The full ABRITES range of functionalities for BMW bikes will be included in this license after the upcoming update of the ABRITES Diagnostics for BMW vehicles, such as:
- Key programming - All Keys Lost and spare key addition
- Chassis and ECU adaptation (change immobilizer ID in ECU)!  - this functionality is incredibly useful when exchanging the ECU
- Module replacement
- Coding

For the purposes of key programming, the ZN003 PROTAG programmer is required.
NEW: 8HP ZF (3RD GENERATION) TRANSMISSION CONTROL UNITS SET TO VIRGIN!

The latest developments for BMW vehicles by ABRITES is now available with the new BN018 license.
BN018 - Immo Parts Adaptation (including 8HP virgin gen3) license supports the adaptation of Transmission Control Units to the EWS via OBDII, including setting to virgin state 3rd generation ZF 8HP TCUs!
The BN018 offers fast and effective TCU exchange.
BN011 legacy license functionality is included in the BN018.
NEW AND UPDATED KEY PROGRAMMING LICENSE BN016

The newest license for key programming for BMW F and E Series is now available in the online shop. All versions, including 85 and higher are supported.
FAST CODING NOW AVAILABLE IN THE BN012 LICENSE

The Advanced Coding Functionality license - BN012 now includes the full coding capabilities for BMW vehicles.
 
ABRITES DIAGNOSTICS FOR VAG VEHICLES VERSION 34.9: IMMO 4.5 2019+ HAVE NOW BEEN ADDED
The VDO (blue connector) dashboards produced up to 2018 were already supported by OBD if a working key was present and by reading the EEPROM dump if we had no working key. The interesting new feature we add with this version is the ability to read and modify the PFLASH in such a way that we can now use the modifications we have made to complete any task needed:
- Key programming
- Cluster Calibration
- IMMO (dashboard) adaptation

The new addition to the software requires the usage of the ZN085 Abrites RH850/ V850 programmer and allows you to work on a 2021-2022 VDO dashboard as if it was made in 2010.
These upgrades save you time and effort in our strive to create a more convenient and useful solution for the problems you face daily. The popularity of the VAG VDO dashboards is great and many people drive these cars. For the moment this is the easiest possible way to handle them.
The VN002 Parts adaptation license is required.
 
ABRITES DIAGNOSTICS FOR TOYOTA, LEXUS, AND SCION VEHICLES ONLINE VERSION 34.9
Mechanical key cloning now available in Abrites diagnostics for Toyota, Lexus, Scion online. With the introduction of version 34.9 you will be able to perform mechanical key cloning for Toyota vehicles directly via the online software, no need to open Tag key tool for any DST-AES and HT-AES key cloning. You can use the Abrites TA68 and TA64 emulators and also you now have the added comfort of just placing as many emulators you need one after the other in the ZN003 PROTAG Programmer to make as many clones as you need. This will save you time and effort!

Also, key learning is improved for Lexus RX, Lexus UX, Toyota Rav4, and Toyota Prius models.
 
NEW: KEY PROGRAMMING FOR SUBARU VEHICLES BY DUMP OF RH850 PROCESSOR
With the newest development for Subaru vehicles by ABRITES, you will be able to program keys in All Keys Lost situations for cars with faulty ESL and clone smart keys.
The upcoming new license offers support for vehicles manufactured after 2020, guaranteeing successful key learning procedure!
In order to complete the task, the ZN085 ABRITES RH850 Programmer, AVDI and active AMS are required.
 
ABRITES DIAGNOSTICS FOR RENAULT AND DACIA VEHICLES ONLINE 34.9
In the new version of the ABRITES Diagnostics for Renault and Dacia vehicles online 34.9 the following is introduced:
- Added mileage recalibration and read/write EEPROM for Renault Kwid instrument cluster via OBD (ABS is already supported via OBD)
- Added mileage recalibration for Megane IV Sedan ph2
- Improved mileage recalibration for Renault Arkana/XM3
- Improved support for UCH Marelli in LoganIII/Sandero III and Jogger

These functionalities are included in the RR029 – Cluster Mileage Calibration for Renault Vehicles (incl. ABS ATE UDS 2020+). AVDI with active AMS is required.
 
ABRITES DIAGNOSTICS FOR MERCEDES-BENZ VEHICLES ONLINE VERSION 34.9
The latest version of the ABRITES Diagnostics for Mercedes-Benz vehicles online offers more smart functions with the click of a button:

- Airbag write key number
- MRD1 clear crash record
- ABS sync ID with ECU

No additional licenses required! Access all guided functions via the basic AVDI software, simply make sure your AMS is active and you have updated to the latest version of the ABRITES Diagnostics for Mercedes-Benz vehicles.
 
ABRITES DIAGNOSTICS FOR HYUNDAI/KIA VEHICLES ONLINE VERSION 34.9
In online version 34.9 of the ABRITES Diagnostics for Hyundai/KIA vehicles we have added
- Change VIN in eCall (Telematic) modules in all models which are equipped with them
It is a fast, easy and safe way to adapt modules from one vehicle to another in a matter of minutes! It works for new and used modules. In this case, the HK012 KIA/HYUNDAI VIN Calibration license is required to do the job.
Also, in 34.9, you will enjoy an improved vehicle detection procedure upon initialising the ABRITES menu for Hyundai/KIA vehicles.
 
ABRITES DIAGNOSTICS FOR VAG VEHICLES VERSION 41.7
Explore the latest features for VAG vehicles in the ABRITES Diagnostics menu (offline)! We've added the activation of soft close and the green menu, achievable in just minutes using AVDI via OBD. These enhancements are part of the basic AVDI software and don't require any additional licenses!

Please note: The soft close functionality can only be enabled in vehicles equipped with the necessary hardware, where the option has been disabled. If the vehicle lacks the required equipment, enabling soft close will not be possible.

Access these features via ABRITES Diagnostics for VAG vehicles (Audi offline), under Special Functions ---> Guided Functions menu. You'll find a list of options to enable or disable. Soft close can be set for each door individually, ensuring it's safe and quick to configure. This feature is available for Audi A6, A7, and A8 models (2010-2018).

The Green Menu can also be accessed through the Guided Functions list, currently located at the bottom. It takes less than a minute to activate or deactivate. Once enabled, you can access it by holding the "Menu" and "Car" buttons in the vehicle. The Green Menu offers a wealth of information, including diagnostic trouble codes (DTCs), navigation details (satellites and coordinates), and much more. This feature is available for Audi A6, A7, and A8 (2010-2018), as well as Volkswagen Touareg (2010-2018) vehicles.

Keep your Annual Maintenance Subscription active to receive all updates to the basic AVDI software and the licenses you already own. Stay tuned for more exciting updates!
 
ABRITES DIAGNOSTICS FOR PORSCHE VERSION 7.3
With the introduction of version 7.3 you will be able to take advantage of a significant improvement concerning the ability to replace immobilizer related modules for the fifth generation of Porsche vehicles. We have reworked the adaptations of the:
-     Engine Control Modules (DME)
-    Transmission Control Modules
-    Electronic Steering Lock (ELV)
-    Front BCM
-    Rear BCM
Apart from these improvements we have added the ability to manually input the Component Security (CS) bytes of the module you want to adapt. This ability helps a lot when the CS bytes are already known, and you just need to type them in the software in order to complete the adaptation procedure. The improvements made coupled with the ability for manual input completely change the experience of adaptation for the better. IMMO V adaptation in Porsche just became a lot more user friendly and will now limit the margin for error both on the software and the user interface side.
This functionality is added to the PO009 - Module Adaptation license without additional charges.
 
ABRITES TAGEKEYTOOL VERSION. 11.15
The new version of the ABRITES TagKeyTool 11.15 features improvements in the runtime for reading HT2 keys.